Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Scientific Reports volume 12, Article number: 21423 (2022 ) Cite this article Benzenamine,2-Chloro-6-Methyl-(6-Cot)
The emergence of multidrug-resistant microbes and the propagation of cancer cells are global health issues. The unique properties of chitosan and its derivatives make it an important candidate for therapeutic applications. Herein, a new thiadiazole derivative, 4-((5-(butylthio)-1,3,4-thiadiazol-2-yl) amino)-4-oxo butanoic acid (BuTD-COOH) was synthesized and used to modify the chitosan through amide linkages, forming a new thiadiazole chitosan derivative (BuTD-CH). The formation of thiadiazole and the chitosan derivative was confirmed by FT-IR, 1H/13C-NMR, GC–MS, TGA, Elemental analysis, and XPS. The BuTD-CH showed a high antimicrobial effect against human pathogens Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, Staphylococcus aureus, and Candida albicans with low MIC values of 25–50 μg ml−1 compared to unmodified chitosan. The in-vitro cytotoxicity of BuTD-CH was evaluated against two cancer cell lines (MCF-7 and HepG2) and one normal cell (HFB4) using the MTT method. The newly synthesized derivatives showed high efficacy against cancerous cells and targeted them at low concentrations (IC50 was 178.9 ± 9.1 and 147.8 ± 10.5 μg ml−1 for MCF-7 and HepG2, respectively) compared with normal HFB4 cells (IC50 was 335.7 ± 11.4 μg ml−1). Thus, low concentrations of newly synthesized BuTD-CH could be safely used as an antimicrobial and pharmacological agent for inhibiting the growth of human pathogenic microbes and hepatocellular and adenocarcinoma therapy.
Cancer is one of the global health issues that have yet to be addressed1. Fortunately, the exclusive properties of chitosan and its derivatives in terms of biodegradability, non-immunogenicity, and biocompatibility make it an important candidate for therapeutic applications. Moreover, chitosan cross-linked grafts manifested antimicrobial activity as well as anticancer efficacy with minimal toxicity on normal cells2. Chitosan is one of the natural polymers that can be employed in many applications due to the presence of functional hydroxyl (‒OH) and amino (‒NH2) groups. These groups provide active centers for conducting many reactions on them and provide the synthesis of many chitosan derivatives with many compounds that can have coordination3,4, antibacterial5,6,7, antifungal8, antioxidant9,10, antiviral properties11, and others. In addition, chitosan has economic attractiveness as it can be easily obtained from chitin by deacetylation. Chitin is one of the most important natural polymers after cellulose. Chitin is found in fungal cell walls as well as in the shells of crustaceans such as crabs, shrimp, and lobsters12. The process of deacetylation of chitin to prepare chitosan occurs at high temperatures and in an alkaline medium, where the amino groups in position number two are liberated due to hydrolysis13. Chitosan has unique properties such as biodegradability, biocompatibility, non-toxicity, and its activity against bacteria. All these properties made it widely used in the field of biomedicine, pharmaceuticals, and environmental pollutants treatment, for example, tissue engineering, gene delivery, and drug delivery7,14,15,16.
Many researchers have prepared chitosan derivatives by reacting its functional groups with heterocyclic compounds containing nitrogen14,17,18,19, sulfur20,21,22, or both4,5,18.
Heterocyclic compounds have attracted the attention of many researchers, as many of them are active against bacteria23, fungi24, inflammations25,26, and cancer27,28. Thiadiazole is one of the important heterocyclic compounds containing nitrogen and sulfur. 1,3,4- Thiadiazoles are very interesting heterocycles compounds because of the contained (–N=N–C–S) group that can be constituted H-bonding interactions with appropriate receptor domains and exhibit varied biological applications29. So, possessing this property, 1,3,4-thiadiazole derivatives are utilized broadly in pharmaceutical, agricultural, coordination chemistry, and materials chemistry30,31. Heterocyclic compounds incorporated thiadiazole nucleus demonstrated a wide range of biological activities such as antioxidant32, cytotoxic33, antibacterial34, antipsychotic35, anti-inflammatory36, analgesic37, antiviral38, antimicrobial39, antihypertensive40, antileishmanial41, and antihistamine42. Mainly, the thiadiazole nucleus has been involved in different medicinal drugs such as the Azetepa (DNA alkylating agent)43, acetazolamide, and methazolamide (carbonic anhydrase inhibitors for glaucoma treatment), sulfamethizole, cefazedone, cefazolin, and ceftezole (as antibacterial drugs)44.
Therefore, the main hypothesis of the current study was the synthesis of thiadiazol derivative for the first time and its use to functionalize chitosan in an attempt to get efficient antimicrobial-modified chitosan with high cytotoxic efficiency. To achieve this hypothesis, a new thiadiazole derivative, 4-((5-(butylthio)-1,3,4-thiadiazol-2-yl) amino)-4-oxo butanoic acid (BuTD-COOH), was synthesized and used to functionalize chitosan through amide linkages forming a new thiadiazole chitosan derivative (BuTD-CH). The new derivative was characterized by FT-IR, 1H/13C-NMR, GC–MS, TGA, elemental analysis, and XPS. The biological activity includes antimicrobial against pathogenic clinical isolates and in-vitro cytotoxic efficacy against two cancerous cell lines (MCF-7 and HepG2) and one normal cell line (HFB4) were investigated and compared with the activity of unmodified chitosan.
In this work, chitosan as a natural polysaccharide was modified by a new thiadiazole derivative, 4-((5-(butylthio)-1,3,4-thiadiazol-2-yl) amino)-4-oxo butanoic acid (BuTD-COOH), by the formation of amide linkages between the carboxylic group of the thiadiazole derivative and the amino groups of chitosan. The thiadiazole derivative was synthesized through three successive steps. First, 5-amino-1,3,4-thiadiazole-2-thiol (TD-NH2) was synthesized by reacting thiosemicarbazide with carbon disulfide as reported previously45. Second, TD-NH2 was reacted with butyl iodide as an alkyl halide to get BuTD-NH2 in the presence of KOH as an HI scavenger. Finally, the primary amine (BuTD-NH2) as a nucleophile was reacted with an acid anhydride (succinic anhydride) to obtain the carboxylic derivative BuTD-COOH.
In the FTIR spectrum of the BuTD–NH2 derivative (Fig. 1), the characteristic broad bands at 3272 cm−1 and 3092 cm−1 are ascribed to the stretching vibrations of the amino group ʋ(NH2), and the stretching vibration absorption band observed at 2953 cm−1 is assigned to aliphatic ʋ(CH). Furthermore, an absorption band around 1631 cm−1, due to azomethine group ʋ(C=N), was observed. The FTIR spectra of the carboxylic intermediate (BuTD-COOH) revealed the absence of the NH2 group′s absorption band, as well as peaks at 3274 cm−1 stretching frequency, indicating the presence of hydroxyl group ʋ(OH), including a peak at 3154 cm−1 attributed to ʋ(–NH). In addition, there were stretching bands at 2931 cm−1 for C–H aliphatic, 1707 cm−1 for the carbonyl group of a carboxylic acid ʋ(COOH), 1685 cm−1 for the carbonyl group of ʋ(NH–C=O), and 1569 cm−1 attributed to the olefinic group ʋ(C=C), respectively. In the infrared spectrum of chitosan, the stretching vibrations for both O–H and NH2 (overlapped) were observed in the region 3331–3291 cm−1. The small broad peaks at 2921 cm−1 and 2877 cm−1 were related to the stretching vibrations of the C–H (symmetrical and asymmetrical) in CH2OH and the pyranose rings. The presence of the broadband at around 1645 cm−1 was due to the stretching vibrations of the C=O (Amide I) and the small broad shoulder at 1589 cm−1 was related to the bending vibrations of the NH in NH2 (Amide II)46. Moreover, the characteristic bands observed at 1423 cm−1, 1375 cm−1, and 1262 cm−1 were associated with the bending vibrations of OH in CH2OH, deformation, wagging, and twisting vibrations of the CH2 in CH2OH and pyranose rings, and stretching vibrations of CH3 symmetrical in the acetyl-amide groups. The peak at 1325 cm−1 was assigned to the C–N stretching of (amide III), as well as the characteristic bands at 1154 cm−1, 1066 cm−1, and 1028 cm−1 were attributed to the stretching vibration of C–O in CH2OH, the symmetric and asymmetric stretching vibrations of both the C–O–C bridge and the C–O in the chitosan, respectively, and the small peak at 896 cm−1 was ascribed to the skeletal vibrations of chitosan47.
FTIR spectrum of BuTD-NH2, BuTD–COOH, Chitosan, and BuTD–CH.
In comparison to the FTIR spectrum of chitosan, the FTIR spectrum of BuTD-CH showed a shifting of the band 3331–3434 cm−1 with an obvious increase in the broadening due to overlapping of NH groups and OH groups. New absorption bands in the FTIR spectrum of BuTD–CH have appeared. The bands appeared at 2999 cm−1 and 2951 cm−1 ascribing to the CH2–vibrations of the succinyl chain (–CH2–CH2–). The carbonyl groups shifting to 1721 cm−1 and 1737 cm−1, the disappearance of the characteristic absorbance of –NH2 at 1589 cm−1, and the appearance of new bands at 633 cm−1 ʋ (C–S)48 evidenced the introduction of the thiadiazole derivative to the chitosan structure.
1H-NMR(CDCl3,500 MHz) (Figure S1a,b) of the BuTD–NH2 intermediate (δ ppm) = 5.91 (s,2H,NH2, exchangeable by D2O), 3.09(t, J = 7.2 Hz, 2H, SCH2 C3H7), 1.68 (m, J = 7.6 Hz, 2H,SCH2CH2 C2H5), 1.42 (m, J = 7.6 Hz, 2H, S(CH2)2CH2CH3) and 0.90 (t, J = 7.2 Hz, 3H, S(CH2)2CH2CH3). Moreover,13C-NMR (CDCl3, 125 MHz) (Figure S1c) appeared the presence of signals (δ ppm) = 169.54 (S–C = NS),154.52 (N–C = NS), 34.94(SCH2C3H7),31.49 (SCH2 CH2C2H5), 21.83 (SC2H4CH2CH3) and 13.64 (SC3H6CH3) and the mass spectrum (Figure S1d), has the molecular ion m/z = 189 (3.65%), confirming its presumed structure. Also, 1H–NMR (DMSO-d6,500 MHz) (Figure S2a,b) of BuTD–COOH revealed the signals (δ ppm) = 12.60 (s, 1H, COOH, exchangeable by D2O), 12.22 (s, 1H, CONH, exchangeable by D2O), 3.16 (t, 2H, (t, J = 7.2 Hz, 2H,SCH2C3H7), 2.65 (t, J = 6.8 Hz, 2H, CH2–acidic), 2.52 (t, J = 6.4 Hz, 2H,CH2-amidic), 1.61(m, J = 7.6 Hz, 2H,SCH2CH2C2H5), 1.36 (m, J = 7.2 Hz, 2H, S(CH2)2 CH2CH3) and 0.85(t, J = 7.2 Hz, 3H, S(CH2)2CH2CH3). 13C-NMR (DMSO-d6, 126 MHz) (Figure S2c) (δ ppm) = 173.93 (COOH), 171.27 (NH–C=O), 159.12(S–C=NS), 159.05(N–C=NS), 33.92(SCH2C3H7), 31.60(SCH2CH2C2H5), 30.38(CH2-acidic), 28.87(CH2-amidic), 21.67 S(CH2)2CH2CH3), 13.92 S(CH2)2CH2CH3). In addition, the mass spectrum of the compound (BuTD-COOH) (Figure S2d) revealed a molecular ion peak at m/e = 289.37 (2.4%), which agreed with the suggested structure.
The 1H-NMR(DMSO-d6,500 MHz) spectrum of BuTD-CH (Fig. 2) showed the characteristic peaks of chitosan in addition to significantly different peaks, which confirmed the incorporation of the thiadiazole derivative into the chitosan skeleton. The chemical shift of the protons of the glucosamine group was observed at 3.33–5.71 ppm and the weak signal at 2.46 ppm due to the three protons of the methyl of the CH3CO–NH group of chitosan49,50. New signals (δ ppm) were observed in the spectrum of BuTD-CH at 12.59 (s, 1H, NH) referring to SCNH–CO of thiadiazole derivative and 8.43 (s, 1H, NH) referring to the amide linkage. Signals observed at 3.28 ppm, 1.67 ppm, 1.38 ppm, and 0.86 ppm are attributed to three methylene and methyl of an n-butyl group. Signals that appeared at 2.65 ppm and 2.52 ppm originated from methylene groups of the succinic unit. All the above-mentioned new peaks confirmed the successful synthesis of the new chitosan derivative (BuTD-CH).
1H-NMR (DMSO-D6) analysis of BuTD–CH.
Using TGA analysis, the thermal behavior of the new chitosan derivative was investigated and compared with that of pure chitosan. The results were presented in Table 1 in terms of mass loss (%) at 200, 400, and 600 °C, onset decomposition temperature (To), the temperature of 50% weight loss (T50), and temperature of maximum decomposition rate (Tmax), and the results of mass loss (%) were plotted against temperature (°C), as shown in Fig. 3. Figure 3 shows that chitosan lost 10.55% of its mass at a temperature of 129.26 °C, while the new chitosan derivative (BuTD-CH) lost only 3.73% of its weight at the same temperature. This is due to the decrease in the number of amino groups in the modified chitosan, where amino groups are linked to water molecules through hydrogen bonds, and the loss in sample mass at this stage represents the desorption of water molecules. Figure 3 shows that chitosan decomposes in one stage, starting at a temperature of 266.08 °C (12.30% mass loss), while the BuTD–CH decomposes in two stages, the first at 185.27 °C (4.79% mass loss) as a result of the degradation of the heterocyclic compound, and the second at 271.12 °C (32.55% mass loss) as a result of the decomposition of the chitosan chain. From the results presented in Table 1, it is clear that the thermal stability of chitosan decreases after the introduction of the heterocyclic compound into its composition.
TGA curve of chitosan (CH) and the modified chitosan (BuTD–CH).
The elemental analysis of unmodified chitosan and modified chitosan was scanned, and the results were found to be 36.38%(C), 5.56%(H), and 6.05%(N) for unmodified chitosan and 35.54%(C), 3.7%(H), 11.01%(N), and 37.51%(S) for BuTD-CH. The elemental analysis data was used to predict the degree of substitution (DS) from the mathematical relationship shown below51.
where X and Y are the carbon/nitrogen ratios of BuTD-CH and chitosan, respectively. α and b are the numbers of nitrogen and carbon elements, respectively, added to chitosan after modification with the BuTD nucleus. Decreasing C% and increasing N% indicate the modification success of chitosan with a degree of substitution of 42%.
XPS examinations are a significant tool for surface analysis, due to their ability to distinguish between different chemical forms of particular atoms based on their oxidation states52. Figure 4 represents the full XPS spectra of chitosan and its BuTD-CH derivative.
Full scans of XPS spectra of chitosan (CH) and its BuTD-CH derivative.
It is clear that the sulphur signals at roughly 226 eV and 166 eV, which are assigned to S 2 s and S 2p, respectively, are present in the spectrum of the chitosan derivative of BuTD-CH, as opposed to the chitosan spectrum, which correlates to the presence of sulphur atoms in chitosan's derivatives53. Moreover, the carbon (C 1 s), oxygen (O 1 s), and nitrogen (N 1 s) signals of the BuTD–CH were slightly displaced combined with increased intensity compared to the CH peaks, which shows the rising quantity of deacetylation of chitosan and the formation of the new derivatives54.
Furthermore, the S 2p peaks at 163.9 and 165.3 eV (Fig. 5a) were associated with S-C in the aliphatic and aromatic groups, respectively55. Meanwhile, significant positive correlations were found at C 1 s and N 1 s peaks. The XPS spectrum of CH for C S1 presents three deconvoluted peaks at 284.7, 286.1, and 287.1 eV which are attributed to C–C, C–N/C–O, and N–C=O respectively56, as shown in Fig. 5b. As expected, the significant shift of the peak at 284.7 eV for BuTD-CH, toward higher binding energy as a result of the substituted acetyl group with a different terminal chain of the polymer was also significant. However, Fig. 5c shows the corresponding peaks of N 1 s of chitosan compound at 399 and 400.5 eV which are attributed to NH2 and NH, respectively. New peaks at ~ 402 eV related to –N=C occurred with a gradual shift, after substitution for chitosan’s derivatives of BuTD-CH. No noteworthy differences were found in the spectra of O 1S for chitosan or its derivatives. Overall, the results show a significant relationship between the formation of BuTD-CH polymers.
XPS spectra of chitosan (CH) and its derivative of BuTD–CH, and bending energy of Sulfur S 2p (a); Carbon C 1 s (b); Nitrogen N 1 s (c).
The prevalence of multidrug-resistant bacterial pathogens has increased the global expansion of life-threatening infections, which necessitates the production and development of pioneering antimicrobials, essentially materials derived from natural products such as functionalized chitosan, which has recently shown efficacy as a broad-spectrum antibiotic57,58. Herein, the agar well diffusion screening was applied to evaluate the antimicrobial potential and minimum inhibitory concentrations of the butylated thiadiazole modified (BuTD-CH) and unmodified chitosan compared with the positive and negative control59. The test was run against a consortium of distinct clinical pathogens comprising Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa), Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis), and the model fungus (Candida albicans). Our results showed that DMSO has always been proven as a safe solvent60, so we used it in this experiment as a negative control and it did not show any interference with the growth of any of the tested microbes. At the lowest concentration (25 μg ml-1), the BuTD-CH, unmodified chitosan, and the selected positive-control antibiotics effectively inhibited the growth of the tested pathogens with variable efficacy in a dose-dependent manner. Interestingly, the BuTD–CH was more active against all tested organisms at low concentrations compared to unmodified chitosan. For instance, 25 μg ml−1 of the BuTD–CH inhibited the growth of B. subtilis and C. albicans; recording inhibition zones (ZOI) 10.83 ± 0.76 and 9.66 ± 0.57 mm respectively, while the application of the same concentration of unmodified chitosan, penicillin G, and the fungicidal ketoconazole did not (Fig. 6A,E). Chitosan is one of the leading biopolymers for its non-toxicity, biocompatibility, accessibility, biodegradability, and respectable antibacterial properties61,62. Moreover, modifying the structure of chitosan with different types of functional groups with cationic properties may increase its reactivity63. This may increase its solubility and modify the pH value to be in the physiological range, which improves its properties as an antibiotic. The efficacy of N-butyl chitosan derivatives was demonstrated as a broad-spectrum antibacterial agent against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa using concentrations of 46, 128, and 128 μg ml−1, respectively64.
The antimicrobial activity of new active butylated chitosan compared with unmodified chitosan against different pathogenic Gram-positive bacteria, B. subtilis (A) and S. aureus (B), Gram-negative bacteria, P. aeruginosa (C) and E. coli (D), and unicellular fungi C. albicans (E). Data are statistically analyzed at p ≤ 0.05 using Tukey’s test (n = 3, ± SD). Bars with the same letters at different concentrations are means that the data are not significantly different.
When the maximum concentrations (300 μg ml−1) were tested, both modified chitosan and penicillin G manifested their maximum activity against B. subtilis with ZOIs of 19.83 ± 0.28 and 19.66 ± 0.57 mm, respectively. There is no significant difference between the inhibitory effects of both. Whereas, the clear zone formed against B. subtilis due to treatment with a maximum concentration of unmodified chitosan was 16.3 ± 0.6 mm. On the contrary, S. aureus showed the lowest sensitivity to the BuTD-CH derivative and penicillin G, recording ZOIs of 15.33 ± 0.57 and 16.66 ± 0.57 mm, respectively, with a significant difference between the inhibitory effects of both (p < 0.05) (Fig. 6 B) as compared to unmodified compound (ZOI is 13.7 ± 0.6 mm). This can be attributed to the low hydrophilicity of cell wall of Gram-positive bacteria compared to Gram-negative bacterial cell wall, which makes them less susceptible to the impact of chitosan65. By and large, the characteristic antibacterial properties of chitosan are affected by its structure. Chitosan compounds with a large molecular weight cannot penetrate the cell wall, but they change cell permeability and prevent the passage of nutrients and essential minerals. Furthermore, low molecular weight chitosan penetrates the cell to affect mitochondrial functions, protein synthesis, and RNA66.
Identically, Gram-negative bacteria showed variable sensitivity as 300 μg ml–1 of BuTD-CH derivative effectively suppressed the growth of P. aeruginosa and E. coli with ZOIs of 15.33 ± 0.57 and 16.33 ± 0.57 mm, respectively. While 300 μg ml–1 of each ciprofloxacin and chitosan derivative had comparable activity against E. coli. However, the potency of 300 μg ml–1 ciprofloxacin was significantly higher than that of modified chitosan against P. aeruginosa (18.33 ± 0.57 and 15.33 ± 0.57 mm, P < 0.05) (Fig. 6C,D). In contrast the unmodified chitosan exhibit inhibitory effects toward P. aeruginosa and E. coli with ZOIs of 14.0 ± 1.0 and 14.3 ± 0.6 mm respectively at a maximum concentration (300 μg ml–1) (Fig. 6C,D). Lipopolysaccharide as a component of the cell wall of Gram-negative bacteria increases the negative charges of the cell surface and thus enhances the binding of the cell to the cationic chitosan, especially at pH < 6.567.
Interestingly, the antifungal properties of BuTD-CH were similar to the effect of ketoconazole, as there was no significant difference for the effect of 300 μg ml–1 of both against C. albicans with ZOIs of 18.16 ± 0.28 and 18.33 ± 0.57 mm, respectively compared to unmodified chitosan that displayed ZOI of 15.3 ± 0.6 mm. The antifungal potential of chitosan derivative could be attributed to the hyperpolarization of the plasma membrane of C. albicans resulting from its strong electrostatic binding to chitosan, which leads to the flowing out of negatively charged molecules in cells such as substrates for enzymatic reactions, nucleotides, and phosphates68.
The effectiveness of infection control depends on the treatment strategy chosen based on the dependable evaluation of MIC69. Our investigations revealed that the lowest MIC records 25 μg ml–1 of BuTD-CH were assigned against B. subtilis, E. coli, and C. albicans with ZOIs of 10.38 ± 0.76, 10.33 ± 0.57, and 9.66 ± 0.57 mm, respectively. The MIC value of modified chitosan increased to 50 μg ml–1 against S. aureus and P. aeruginosa with ZOIs of 10. 66 ± 0.28 and 10.33 ± 0.57 mm, respectively (Fig. 6). Whereas the MIC values of unmodified chitosan were increased to 100 μg ml–1 toward Gram-positive bacteria (B. subtilis and S. aureus), and P. aeruginosa, and 50 μg ml–1 against E. coli, and C. albicans. Similarly, the MIC values of chitosan and its Schiff base derivatives against S. aureus, B. cereus, Salmonella sp., P. aeruginosa, E. coli, and C. albicans were in the range of 25−100 μg ml–1 70. The current examination revealed that the MIC value of ciprofloxacin was 25 μg ml–1 against Gram-negative tested pathogens, while the MIC values of penicillin G and ketoconazole against Gram-positive and fungal pathogens, respectively, were perceived at 50 μg ml–1. These findings are consistent with previous studies confirming that the elimination of fungal infections may require intensive doses, as they have a very solid cell wall containing chitin and glucan and is completely different from the bacterial cell wall71,72. Overall, it can be concluded that the antimicrobial activity of functionalized chitosan with thiadiazole derivative was increased compared to unmodified compound.
Herein, the cytotoxicity of the newly modified chitosan compared to the unmodified was evaluated against two cancer cell lines (MCF-7, HepG2) and the non-carcinogenic (HFB4) cloned cell line by the MTT assay, while changes in the cellular phenotypic models were visualized by direct microscopy. The microscopic examination confirmed the efficacy of the BuTD-CH and unmodified compound against cancerous cells, which had undergone some morphological changes such as roundness, shrinkage, granulation, and migration, ending with the loss of the mono-layer characteristic of epithelial cells (Fig. 7). In the current study, six different concentrations of the modified chitosan (31.25–1000 μg ml–1) were attended for cytotoxicity investigations. The results revealed a dramatic reduction in the cell proliferation rate with increasing the synthesized chitosan concentration in a dose-dependent mode. We recorded analog phenotypic changes in both cancerous and non-cancerous cells treated with the modified chitosan. The BuTD-CH concentrations required for 50% of cell population mortality (IC50) were calculated from the constructed curve (Fig. 8). Interestingly, the IC50 for normal fibroblast cells = 335.7 ± 11.4 and 275 ± 0.5 μg ml–1 for modified and nonmodified chitosan respectively. These values for normal cells represent about twice the values specified for the two cancerous cells MCF-7 and HepG2 which were (178.9 ± 9.1 and 147.8 ± 10.5 μg ml–1, respectively) for functionalized BuTD–CH (Fig. 8A) and (127.1 ± 1.0 and 122.1 ± 1.4 μg ml–1, respectively) for unmodified chitosan (Fig. 8B). Since low concentrations of the BuTD-CH and chitosan without any modification manifested antiproliferative impact on the cancerous cells (MCF-7 and HepG2), while it can affect the population and survival of the normal fibroblasts (HFB4) only if applied in elevated concentrations, it is possible to exploit this target-orientation to create a therapeutic window for applying the synthesized BuTD-CH derivative as a chemotherapeutic agent. Thus, up to 180 μg ml–1 BuTD-CH could be safely used as a pharmacological agent for hepatocellular and adenocarcinoma therapy.
Microscope images of cancerous cell lines (HepG2 and MCF-7) and normal fibroblast. cells (HFB4) with and without BuTD-CH at different concentrations (0, 125, and 500 μg/ml).
The cell viability assay using the MTT method of cancerous cell lines (HepG2, Mcf7) and normal fibroblast cells (HFB4) due to treatment with different concentrations of BuTD-CH (A) and unmodified chitosan (B).
In the same context, the dose-dependent cytotoxicity of chitin and chitosan derivatives was proved against human liver cancer (HepG2) and rhabdomyosarcoma cell lines73. Recently, Resmi and coworkers reported the antiproliferative potential of the biogenic chitosan against adenocarcinoma (breast cancer cells MCF-7) in a concentration-dependent mode while being safe for the normal fibroblast cells (L929)74. The cytotoxicity of chitosan compounds could be attributed to the amino group that developed a positive charge in slightly acidic to neutral media (pKa∼ 6.5) enhancing chitosan water solubility and bio-adhesivity for promoted binding and penetration out of negative charge surfaces as basement and mucosal membrane75.
Chitosan (CH), Hydrazine carbothioamide (99%), and Butyl iodide (99%) were obtained from Sigma–Aldrich. Thionyl dichloride (99%) and carbon bisulfide (99%) were got from Alfa Aesar. Solvents (Methylene dichloride (HPLC) and Toluene (HPLC)), hydrochloric acid (37%), and sodium carbonate (99%) were purchased from Thermo Fisher Scientific and Nasr companies. Distilled water was prepared in a research laboratory. Succinic anhydride (CA) was synthesized as previously reported76.
The average molecular weight of chitosan was determined by the Viscometry method using the Mark–Houwink equation as reported by Wang et al.77. Dried chitosan sample (0.1 g) was dissolved in 100 ml solvent (0.1 M sodium acetate + 0.2 M acetic acid). Five concentrations of chitosan solutions were prepared by dilution using a fresh solvent. The measurements were done at 30 °C using a Ubbelohde viscometer. The time flow of pure solvent and each chitosan concentration was conducted three times and the average was taken. For each concentration, the relative viscosity, specific viscosity, reduced viscosity, and inherent viscosity were calculated. The intrinsic [η] was obtained by extrapolating the reduced viscosity or inherent viscosity versus concentration data. Then, the molecular weight was calculated by the equations reported by Wang et al. It was found that the estimated viscosity's average molecular weight was 61 × 103 g/mol.
The deacetylation degree (DD) of chitosan was calculated based on its elemental analysis using Eq. (2) 18
where n1 and n2 are the number of carbon atoms in the chitin and acetamido groups, respectively. Mc and Mn are the molar mass of carbon and nitrogen, Mc = 12 and Mn = 14, respectively. From the calculations, DD was found to be 70.89%.
The compound (TD-NH2) was obtained according to the experimental procedure in the method reported in our previous work45.
Two grams (15 mmol) of TD-NH2 were placed portion-wise into a solution of KOH (30 mmol) in ethyl alcohol (15 ml). The substance was stirred until it was completely dissolved in the reaction mixture. The conical flask was cooled in ice water and a halogenated saturated aliphatic hydrocarbon (butyl iodide) (15 mmol) was added over 50 min with vigorous stirring. After allowing the mixture to come to room temperature, it was stirred for around 8 h at room temperature. After completion of the reaction, the resulting solids were collected by filtration, washed with distilled H2O (3 × 20 ml), and recrystallized from MeOH/H2O to yield the title compound (2.66 g, 93.66%, pale-yellow, melting point: 116–118 °C)78,79.
5-(butylthio)-1,3,4-thiadiazol-2-amine (10 mmol) and succinic anhydride (13.2 mmol) were mixed at room temperature in dry benzene in an Erlenmeyer flask fitted with a mechanical stirrer, and the mixture was stirred until full conversion was achieved. This was achieved after approximately 3 h. The product separates as a solid, and the solvent eventually evaporates under a vacuum. The residue was rinsed with distilled water 3 times and purified by recrystallization from ethanol/benzene to generate the target compound. (The yield is 2.1 g. (84%) of a white product melting at 242–244 °C).
The modified chitosan, BuTD-CH, was synthesized by the formation of amide linkages. A solution of BuTD-COOH (6.57 mmol) in anhydrous dichloromethane was charged into a 250 ml two-necked round bottom flask equipped with a mechanical stirrer, a dropping funnel (50 ml), and an internal thermometer, and the solution was chilled to 0 °C in an ice/NaCl bath. The SOCl2 (0.13 mmol) in dry dichloromethane was added gradually to the flask via the dropping funnel at such a rate to keep the internal temperature below 5 °C. Then, the mixture was stirred under reflux for 2 h at 70 °C, and the solvent was extracted under reduced pressure, yielding a crude product ready for the following step without further purification. Chitosan powder (1.45 g) was added to a crude product in (50 ml) of anhydrous CH2Cl2, in the presence of a catalytic amount of triethyl amine (9.85 mmol). The reaction mixture was stirred under reflux for 24 h at 70 °C. Afterward, the solvent was evaporated under a vacuum. The product was washed with dichloromethane to get thiadiazole-grafted chitosan as demonstrated in Fig. 9.
Schematic pathway for the synthesis of butylated thiadiazol chitosan derivative (BuTD-CH).
The melting points of solid compounds were determined on the SMP50 Digital APP Apparatus (Bibby Scientific, Staffordshire, UK) 120/230 V instrument. Infrared spectra were measured on a Shimadzu FT-IR Affinity-1 Spectrometer, Infrared spectrometer the Nicolet iS10FT IR Spectrometer, Thermo Fisher Scientific Resolution 16, over a scanning range of 4000–400 cm−1, Band positions were described as wavenumbers at (ν cm−1) scale on the KBr plates at Faculty of Science-Ain Shams University, Cairo, Egypt. Proton/carbon-nuclear magnetic resonance (1H/13C-NMR, 500/125 MHz) spectra were carried out with JNM-ECA 500 II made by JEOL-JAPAN instrument and referenced to DMSO-d6 ((CD3)2SO) as a solvent and TMS as an internal reference. Chemical shifts are expressed in parts per million. In the NMR tabulation, s: singlet; d, doublet; t, triplet; q, quartet; m, multiplet; and br, broad peak. GC–MS was performed with Shimadzu Japan's GC–2010. Thermogravimetric analysis (TGA) of the sample was performed under N2 flow with heating rates measured at 10 °C/min from 0 to 500 °C on the Discovery SDT 650-Simultaneous DSC-TGA/DTA Instruments, USA. The sample was also analyzed for C, H, N, and S at the Microanalytical Center, Cairo University, Giza, Egypt, using the Elemental C–H–N–S AnalyzerVario El M, Germany, and values were obtained within ± 0.4% of the calculated values. XPS was collected on K-ALPHA (Thermo Fisher Scientific, USA) with monochromatic x-ray Al K-Alpha radiation from −10 to 1350 e.v. Spot size 400 micro m at pressure 10–9 mbar with full spectrum pass energy 200 e.v. and at narrow spectrum 50 e.v.
The agar well diffusion assay was employed to explore the antimicrobial properties of modified and nonmodified chitosan against a group of clinical pathogens including Gram-negative bacteria (Escherichia coli ATCC8739 and Pseudomonas aeruginosa ATCC9022), Gram-positive bacteria (Bacillus subtilis ATCC6633 and Staphylococcus aureus ATCC6538), and the model of unicellular fungi (Candida albicans ATCC10231). Candida albicans and the tested bacterial strains were cultured in yeast extract peptone dextrose (YEPD) broth media and nutrient broth for one day at 35 ± 2 °C80. In each experiment, 50 μl of each microbial progeny (O.D = 1.0) were seeded onto 100 ml of sterilized Muller Hinton agar media (Oxoid) and dispensed in Petri dishes. 0.7 mm wells were cut in the solidified seeded plates. A stock solution of the chitosan (modified and nonmodified) was prepared in DMSO (300 μg/1.0 ml DMSO) and made ready for double-fold concentrations (200, 100, 50, 25, and 12.5 μg ml–1) that were used to determine the value of the minimum inhibitory concentration (MIC). Finally, 100 μL of each chitosan concentration was decanted into an agar well, along with 100 μl of pure DMSO as a negative control and 100 μl of penicillin G, ciprofloxacin, and ketoconazole as positive controls for Gram-positive, Gram-negative bacteria, and unicellular fungi, respectively. The laden Muller Hinton agar plates were refrigerated for 60 min before being incubated at 35 ± 2 °C for one day81. The activity of the butylated chitosan and MIC values were determined by measuring the zone of inhibition (ZOI) that was appointed using standard deviation (± SD) in three independent repetitions.
The MCF-7 (adenocarcinoma), HepG2 (human liver cancer), and HFB4 (normal melanocytes) cell lines were purchased from the Holding Company for Biological Products and Vaccines (VACSERA) Cairo, Egypt.
1 mg of tested compounds (modified and unmodified chitosan) was solved in 1 ml of Gibco Roswell Park Memorial Institute (RPMI) medium and sterilized by filtering through a 0.22 μm syringe filter (Millipore).
The cytotoxicity of modified chitosan against cancer (MCF-7 and HepG2) and normal (HFB4) cell lines compared to the unmodified compound was evaluated by conducting a Dimethyl thiazolyl tetrazolium bromide (MTT) assay. The tested cells were grown in 96-well tissue culture plates (100 μl/well, 1 × 105 cells) and incubated at 37 °C in a humidified condition in a 5% CO2 incubator for 24 h. After a confluent sheet of cells was formed, the cell monolayer was washed twice with washing media and incubated for 48 h in maintenance media (RPMI medium with 2% serum) treated with double-fold dilutions (1000–31.25 μg ml–1) of tested chitosan (modified or unmodified), with three wells receiving only RPMI medium as control. After incubation, culture media were decanted and 50 μL of fresh MTT solution (5 mg/mL in PBS, BIO BASIC CANADA INC) were added to each well, and thoroughly mixed for 5 min on a shaking table (150 rpm), Plates were incubated for 4 h to allow metabolization of MTT. After incubation, the media were dumped off and the developed formazan crystals were dissolved in DMSO (10%), and the plates were shaken in the dark for 30 min. Finally, the optical density was measured at 570 nm in a multi-well ELISA plate reader82,83. Changes in cell morphology were visualized by a phase contrast microscope. Cell viability was calculated by the following equation (Eq. 3)84:
Data of biological activities are represented as the means of three independent replicates. The collected data were analyzed using the statistical package SPSS v17. The mean difference comparison between the treatments was analyzed by t-test or the analysis of variance (ANOVA) and subsequently by the Tukey HSD test at p < 0.05.
In this study, a new thiadiazole chitosan derivative was formed by the reaction of a new synthesized compound, 4-((5-(butylthio)-1,3,4-thiadiazol-2-yl) amino)-4-oxo butanoic acid with chitosan. The obtained modified chitosan was characterized using FT-IR, 1H/13C-NMR, GC–MS, TGA, elemental analysis, and XPS. The synthesized chitosan derivatives showed high antimicrobial and in-vitro cytotoxicity activity. The antimicrobial investigation indicated that the lowest MIC of the chitosan derivative (BuTD-CH) was 25 μg ml–1 against B. subtilis, E. coli, and C. albicans with ZOIs of 10.38 ± 0.76, 10.33 ± 0.57, and 9.66 ± 0.57 mm, respectively. Whereas this value was increased to 50 μg ml–1 against S. aureus and P. aeruginosa with ZOIs of 10. 66 ± 0.28 and 10.33 ± 0.57 mm, respectively. The modified chitosan showed high antimicrobial activity compared to the unmodified compound. The synthesized chitosan derivative showed high efficacy against breast cancer cell lines (MCF-7) and human liver cancer cell lines (HepG2) and caused a dramatic reduction in the cell proliferation rate with increasing its concentration. The low concentrations of the chitosan derivative (BuTD-CH) and chitosan manifested an antiproliferative impact on the cancerous cells (MCF-7 and HepG2), while it could affect the population and survival of the normal fibroblasts (HFB4) only if applied in elevated concentrations. It is possible to exploit this target orientation to create a therapeutic window for applying chitosan compound as a chemotherapeutic agent. The obtained data confirmed the main hypothesis of the current study, which was the possibility of integration of functionalized chitosan with new thiadiazole derivatives in biomedical applications.
The datasets used and/or analyzed during the current study are available from the corresponding author on reasonable request.
Li, X., Wang, Y., Feng, C., Chen, H. & Gao, Y. Chemical modification of chitosan for developing cancer nanotheranostics. Biomacromol 23, 2197 (2022).
Mostafa, M. A., Ismail, M. M., Morsy, J. M., Hassanin, H. M. & Abdelrazek, M. M. Synthesis, characterization, anticancer, and antioxidant activities of chitosan Schiff bases bearing quinolinone or pyranoquinolinone and their silver nanoparticles derivatives. Polym. Bull., 1–25 (2022).
Becker, T., Schlaak, M. & Strasdeit, H. Adsorption of nickel (II), zinc (II) and cadmium (II) by new chitosan derivatives. React. Funct. Polym. 44, 289–298 (2000).
Gamal, A., Ibrahim, A. G., Eliwa, E. M., El-Zomrawy, A. H. & El-Bahy, S. M. Synthesis and characterization of a novel benzothiazole functionalized chitosan and its use for effective adsorption of Cu (II). Int. J. Biol. Macromol. 183, 1283–1292 (2021).
Zidan, T. A., Abdelhamid, A. E. & Zaki, E. G. N-Aminorhodanine modified chitosan hydrogel for antibacterial and copper ions removal from aqueous solutions. Int. J. Biol. Macromol. 158, 32–42 (2020).
Ahmad, M., Ahmed, S., Swami, B. L. & Ikram, S. Preparation and characterization of antibacterial thiosemicarbazide chitosan as efficient Cu (II) adsorbent. Carbohydr. Polym. 132, 164–172 (2015).
Přichystalová, H. et al. Synthesis, characterization and antibacterial activity of new fluorescent chitosan derivatives. Int. J. Biol. Macromol. 65, 234–240 (2014).
Li, Q., Tan, W., Zhang, C., Gu, G. & Guo, Z. Synthesis of water soluble chitosan derivatives with halogeno-1, 2, 3-triazole and their antifungal activity. Int. J. Biol. Macromol. 91, 623–629 (2016).
Ji, X. et al. Preparation of 1, 3, 5-thiadiazine-2-thione derivatives of chitosan and their potential antioxidant activity in vitro. Bioorg. Med. Chem. Lett. 17, 4275–4279 (2007).
Demetgül, C. & Beyazit, N. Synthesis, characterization and antioxidant activity of chitosan-chromone derivatives. Carbohydr. Polym. 181, 812–817. https://doi.org/10.1016/j.carbpol.2017.11.074 (2018).
He, X. et al. The improved antiviral activities of amino-modified chitosan derivatives on Newcastle virus. Drug Chem. Toxicol. 44, 335–340 (2021).
Zhang, J. et al. Liquefied chitin/polyvinyl alcohol based blend membranes: Preparation and characterization and antibacterial activity. Carbohydr. Polym. 180, 175–181 (2018).
Zahra, M. H. et al. Synthesis of a novel adsorbent based on chitosan magnetite nanoparticles for the high sorption of Cr (VI) ions: A study of photocatalysis and recovery on tannery effluents. Catalysts 12 (2022).
Rahmouni, N. et al. Improvement of chitosan solubility and bactericidity by synthesis of N-benzimidazole-O-acetyl-chitosan and its electrodeposition. Int. J. Biol. Macromol. 113, 623–630 (2018).
Mohamed, R. R., Elella, M. H. A. & Sabaa, M. W. Cytotoxicity and metal ions removal using antibacterial biodegradable hydrogels based on N-quaternized chitosan/poly (acrylic acid). Int. J. Biol. Macromol. 98, 302–313 (2017).
Hamza, M. F., Alotaibi, S. H., Wei, Y. & Mashaal, N. M. High-performance hydrogel based on modified chitosan for removal of heavy metal ions in borehole: A Case Study from the Bahariya Oasis, Egypt. Catalysts 12 (2022).
Kandile, N. G., Mohamed, H. M. & Mohamed, M. I. New heterocycle modified chitosan adsorbent for metal ions (II) removal from aqueous systems. Int. J. Biol. Macromol. 72, 110–116. https://doi.org/10.1016/j.ijbiomac.2014.07.042 (2015).
Mi, Y. et al. New synthetic chitosan derivatives bearing benzenoid/heterocyclic moieties with enhanced antioxidant and antifungal activities. Carbohydr. Polym. 249, 116847. https://doi.org/10.1016/j.carbpol.2020.116847 (2020).
Portnyagin, A. S., Bratskaya, S. Y., Pestov, A. V. & Voit, A. V. Binding Ni (II) ions to chitosan and its N-heterocyclic derivatives: Density functional theory investigation. Comput. Theor. Chem. 1069, 4–10 (2015).
Maity, S., Naskar, N., Jana, B., Lahiri, S. & Ganguly, J. Fabrication of thiophene-chitosan hydrogel-trap for efficient immobilization of mercury (II) from aqueous environs. Carbohydr. Polym. 251, 116999 (2021).
Pang, K. et al. Sulfur-modified chitosan derived N, S-co-doped carbon as a bifunctional material for adsorption and catalytic degradation sulfamethoxazole by persulfate. J. Hazard. Mater. 424, 127270 (2022).
Adhikari, H. S., Garai, A., Thapa, M., Adhikari, R. & Yadav, P. N. Chitosan functionalized thiophene-2-thiosemicarbazones, and their copper (II) complexes: synthesis, characterization, and anticancer activity. J. Macromol. Sci. A, 1–17 (2021).
Omara, T., Musau, B. & Kagoya, S. Frugal utilization of flue-cured virginia Nicotiana tabacum leaf wastes as a vicissitudinous substrate for optimized synthesis of pyridine-3-carboxylic acid. Amer. J. Hetero Chem. 4, 49–54 (2018).
Khanum, S. A., Shashikanth, S., Sathyanarayana, S. G., Lokesh, S. & Deepak, S. A. Synthesis and antifungal activity of 2-azetidinonyl-5-(2-benzoylphenoxy) methyl-1, 3, 4-oxadiazoles against seed-borne pathogens of Eleusine coracana (L.) Gaertn. Pest Manag. Sci. 65, 776–780 (2009).
Archna et al. Exploration of antioxidant, anti-inflammatory and anticancer potential of substituted 4-thiazolidinone derivatives: Synthesis, biological evaluation and docking studies. Polycycl. Aromat. Compd., 1–22 (2022).
Wang, W. et al. Synthesis of lathyrane diterpenoid nitrogen-containing heterocyclic derivatives and evaluation of their anti-inflammatory activities. Bioorg. Med. Chem., 116627 (2022).
Galal, S. A., Abd El-All, A. S., Abdallah, M. M. & El-Diwani, H. I. Synthesis of potent antitumor and antiviral benzofuran derivatives. Bioorg. Med. Chem. Lett. 19, 2420–2428 (2009).
More, N. A. et al. Novel 3-fluoro-4-morpholinoaniline derivatives: Synthesis and assessment of anti-cancer activity in breast cancer cells. J. Mol. Struct. 1253, 132127 (2022).
Luo, Z. et al. Synthesis and antitumor-evaluation of 1, 3, 4-thiadiazole-containing benzisoselenazolone derivatives. Bioorg. Med. Chem. Lett. 22, 3191–3193 (2012).
Haider, S., Alam, M. S. & Hamid, H. 1, 3, 4-Thiadiazoles: A potent multi targeted pharmacological scaffold. Eur. J. Med. Chem. 92, 156–177 (2015).
Frija, L. M. T., Pombeiro, A. J. L. & Kopylovich, M. N. Coordination chemistry of thiazoles, isothiazoles and thiadiazoles. Coord. Chem. Rev. 308, 32–55 (2016).
Dincel, E. D., Gürsoy, E., Yilmaz-Ozden, T. & Ulusoy-Güzeldemirci, N. Antioxidant activity of novel imidazo [2, 1-b] thiazole derivatives: Design, synthesis, biological evaluation, molecular docking study and in silico ADME prediction. Bioorg. Chem. 103, 104220 (2020).
Aliabadi, A., Eghbalian, E. & Kiani, A. Synthesis and evaluation of the cytotoxicity of a series of 1, 3, 4-thiadiazole based compounds as anticancer agents. Iran. J. Basic Med. Sci. 16, 1133 (2013).
Li, P. et al. Antibacterial activities against rice bacterial leaf blight and tomato bacterial wilt of 2-mercapto-5-substituted-1, 3, 4-oxadiazole/thiadiazole derivatives. Bioorg. Med. Chem. Lett. 25, 481–484 (2015).
Kaur, H. et al. Synthesis and antipsychotic and anticonvulsant activity of some new substituted oxa/thiadiazolylazetidinonyl/thiazolidinonylcarbazoles. Eur. J. Med. Chem. 45, 2777–2783 (2010).
Hafez, H. N., Hegab, M. I., Ahmed-Farag, I. S. & El-Gazzar, A. B. A. A facile regioselective synthesis of novel spiro-thioxanthene and spiro-xanthene-9′, 2-[1, 3, 4] thiadiazole derivatives as potential analgesic and anti-inflammatory agents. Bioorg. Med. Chem. Lett. 18, 4538–4543 (2008).
Ragab, F. A. et al. Anti-inflammatory, analgesic and COX-2 inhibitory activity of novel thiadiazoles in irradiated rats. J. Photochem. Photobiol. B 166, 285–300 (2017).
Chen, Z. et al. Synthesis and antiviral activity of 5-(4-chlorophenyl)-1, 3, 4-thiadiazole sulfonamides. Molecules 15, 9046–9056 (2010).
El-Gohary, N. S. & Shaaban, M. I. Synthesis, antimicrobial, antiquorum-sensing, antitumor and cytotoxic activities of new series of fused [1, 3, 4] thiadiazoles. Eur. J. Med. Chem. 63, 185–195 (2013).
Turner, S. et al. Antihypertensive thiadiazoles. 1. Synthesis of some 2-aryl-5-hydrazino-1, 3, 4-thiadiazoles with vasodilator activity. J. Med. Chem. 31, 902–906 (1988).
Poorrajab, F. et al. Nitroimidazolyl-1, 3, 4-thiadiazole-based anti-leishmanial agents: Synthesis and in vitro biological evaluation. Eur. J. Med. Chem. 44, 1758–1762 (2009).
Gupta, J. K., Yadav, R. K., Dudhe, R. & Sharma, P. K. Recent advancements in the synthesis and pharmacological evaluation of substituted 1, 3, 4‐thiadiazole derivatives. Chem. Inform. 41, no-no (2010).
Choy, D. S. J., Arandia, J. & Rosenbaum, I. Clinical evaluation of a new alkylating agent, Azetepa, in one hundred and twenty-five cases of malignant tumors. Int. J. Cancer 2, 189–193 (1967).
Kumar, R. et al. Benzenesulfonamide bearing imidazothiadiazole and thiazolotriazole scaffolds as potent tumor associated human carbonic anhydrase IX and XII inhibitors. Bioorg. Med. Chem. 25, 1286–1293 (2017).
Mohamed, A. E. et al. Synthesis and characterization of new functionalized chitosan and its antimicrobial and in-vitro release behavior from topical gel. Int. J. Biol. Macromol. 207, 242–253 (2022).
Lim, S.-H. & Hudson, S. M. Synthesis and antimicrobial activity of a water-soluble chitosan derivative with a fiber-reactive group. Carbohydr. Res. 339, 313–319 (2004).
Socrates, G. Infrared and Raman characteristic group frequencies: Tables and charts. (John Wiley & Sons, 2004).
Li, Q. et al. Synthesis and antifungal activity of thiadiazole-functionalized chitosan derivatives. Carbohydr. Res. 373, 103–107 (2013).
Hu, L. et al. Design, synthesis and antimicrobial activity of 6-N-substituted chitosan derivatives. Bioorg. Med. Chem. Lett. 26, 4548–4551 (2016).
Jia, R., Duan, Y., Fang, Q., Wang, X. & Huang, J. Pyridine-grafted chitosan derivative as an antifungal agent. Food Chem. 196, 381–387 (2016).
Baran, T. & Menteş, A. Cu (II) and Pd (II) complexes of water soluble O-carboxymethyl chitosan Schiff bases: Synthesis, characterization. Int. J. Biol. Macromol. 79, 542–554 (2015).
Hamad, H. A. et al. Fabrication and characterization of functionalized lignin-based adsorbent prepared from black liquor in the paper industry for superior removal of toxic dye. Fuel 323, 124288 (2022).
Fantauzzi, M., Elsener, B., Atzei, D., Rigoldi, A. & Rossi, A. Exploiting XPS for the identification of sulfides and polysulfides. RSC Adv. 5, 75953–75963 (2015).
Article ADS CAS Google Scholar
Li, P.-C. et al. Fabrication and characterization of chitosan nanoparticle-incorporated quaternized poly (vinyl alcohol) composite membranes as solid electrolytes for direct methanol alkaline fuel cells. Electrochim. Acta 187, 616–628 (2016).
Tai, G. et al. Fast and large-area growth of uniform MoS 2 monolayers on molybdenum foils. Nanoscale 8, 2234–2241 (2016).
Article ADS CAS Google Scholar
Skallberg, A., Brommesson, C. & Uvdal, K. Imaging XPS and photoemission electron microscopy; surface chemical mapping and blood cell visualization. Biointerphases 12, 02C408 (2017).
Hamza, M. F. et al. Functionalized biobased composite for metal decontamination–insight on uranium and application to water samples collected from wells in mining areas (Sinai, Egypt). Chem. Eng. J. 431, 133967. https://doi.org/10.1016/j.cej.2021.133967 (2022).
Miethke, M. et al. Towards the sustainable discovery and development of new antibiotics. Nat. Rev. Chem. https://doi.org/10.1038/s41570-021-00313-1 (2021).
Hamza, M. F. et al. Poly-condensation of N-(2-acetamido)-2-aminoethanesulfonic acid with formaldehyde for the synthesis of a highly efficient sorbent for Cs(I). Chem. Eng. J. 454, 140155. https://doi.org/10.1016/j.cej.2022.140155 (2023).
Xie, Y. et al. Isolation and identification of antibacterial bioactive compounds from Bacillus megaterium L2. Front. Microbiol. 12, 645484 (2021).
Hamza, M. F. et al. Functionalization of magnetic chitosan microparticles for high-performance removal of chromate from aqueous solutions and tannery effluent. Chem. Eng. J. 428, 131775. https://doi.org/10.1016/j.cej.2021.131775 (2022).
Saleh, A. S. et al. Preparation of poly (chitosan-acrylamide) flocculant using gamma radiation for adsorption of Cu (II) and Ni (II) ions. Radiat. Phys. Chem. 134, 33–39 (2017).
Article ADS CAS Google Scholar
Ardean, C. et al. Factors influencing the antibacterial activity of chitosan and chitosan modified by functionalization. Int. J. Mol. Sci. https://doi.org/10.3390/ijms22147449 (2021).
Sahariah, P. & Másson, M. Antimicrobial chitosan and chitosan derivatives: A review of the structure–activity relationship. Biomacromol 18, 3846–3868 (2017).
Goy , RC , Britto , DD & Assis , OBG A review of the antimicrobial activity of chitosan .Polymers 19, 241–247 (2009).
Ke, C.-L., Deng, F.-S., Chuang, C.-Y. & Lin, C.-H. Antimicrobial actions and applications of chitosan. Polymers 13, 904. https://doi.org/10.3390/polym13060904 (2021).
Yilmaz Atay, H. Antibacterial activity of chitosan-based systems. Funct. Chitosan https://doi.org/10.1007/978-981-15-0263-7_15 (2020).
Peña, A., Sánchez, N. S. & Calahorra, M. Effects of chitosan on Candida albicans: Conditions for its antifungal activity. Biomed Res. Int. 2013 (2013).
Kowalska-Krochmal, B. & Dudek-Wicher, R. The minimum inhibitory concentration of antibiotics: Methods, interpretation, clinical relevance. Pathogens https://doi.org/10.3390/pathogens10020165 (2021).
Hassan, M. A., Omer, A. M., Abbas, E., Baset, W. M. A. & Tamer, T. M. Preparation, physicochemical characterization and antimicrobial activities of novel two phenolic chitosan Schiff base derivatives. Sci. Rep. 8, 11416. https://doi.org/10.1038/s41598-018-29650-w (2018).
Article ADS CAS Google Scholar
Hassan, M. A., Omer, A. M., Abbas, E., Baset, W. & Tamer, T. M. Preparation, physicochemical characterization and antimicrobial activities of novel two phenolic chitosan Schiff base derivatives. Sci. Rep. 8, 1–14 (2018).
Fouda, A., Hassan, S. E., Eid, A. M., Abdel-Rahman, M. A. & Hamza, M. F. Light enhanced the antimicrobial, anticancer, and catalytic activities of selenium nanoparticles fabricated by endophytic fungal strain, Penicillium crustosum EP-1. Sci. Rep. 12, 11834. https://doi.org/10.1038/s41598-022-15903-2 (2022).
Article ADS CAS Google Scholar
Bouhenna, M. et al. Effects of chitin and its derivatives on human cancer cells lines. Environ. Sci. Pollut. Res. 22, 15579–15586 (2015).
Resmi, R., Yoonus, J. & Beena, B. Anticancer and antibacterial activity of chitosan extracted from shrimp shell waste. Mater. Today 41, 570–576 (2021).
Adhikari, H. S. & Yadav, P. N. Anticancer activity of chitosan, chitosan derivatives, and their mechanism of action. Int. J. Biomater. 2018 (2018).
Bayat, M. & Fox, J. M. An efficient one-pot synthesis of bis butenolides. J. Heterocycl. Chem. 53, 1661–1664 (2016).
Wang, W., Bo, S., Li, S. & Qin, W. Determination of the Mark-Houwink equation for chitosans with different degrees of deacetylation. Int. J. Biol. Macromol. 13, 281–285 (1991).
Wan, J. et al. Design, synthesis and anti-bacterial evaluation of novel 1, 3, 4-thiadiazole derivatives bearing a semicarbazone moiety. Phosphorus Sulfur Silicon Relat. Elem. 193, 443–450 (2018).
Gao, Y., Samanta, S., Cui, T. & Lam, Y. Synthesis and in vitro evaluation of west nile virus protease inhibitors based on the 1, 3, 4, 5-tetrasubstituted 1H-Pyrrol-2 (5H)-one scaffold. ChemMedChem 8, 1554–1560 (2013).
Valgas, C., Souza, S. M. D., Smânia, E. F. A. & Smânia, A. Jr. Screening methods to determine antibacterial activity of natural products. Braz. J. Microbiol. 38, 369–380 (2007).
Fouda, A. et al. Plant growth-promoting endophytic bacterial community inhabiting the leaves of pulicaria incisa (Lam.) DC inherent to arid regions. Plants https://doi.org/10.3390/plants10010076 (2021).
Philip, S. & Kundu, G. C. Osteopontin induces nuclear factor κB-mediated promatrix metalloproteinase-2 activation through IκBα/IKK signaling pathways, and curcumin (diferulolylmethane) down-regulates these pathways. J. Biol. Chem. 278, 14487–14497 (2003).
Eid, A. M. et al. Endophytic Streptomyces laurentii mediated green synthesis of Ag-NPs with antibacterial and anticancer properties for developing functional textile fabric properties. Antibiotics https://doi.org/10.3390/antibiotics9100641 (2020).
Fouda, A. et al. Endophytic bacterial strain, Brevibacillus brevis-mediated green synthesis of copper oxide nanoparticles, characterization, antifungal, in vitro cytotoxicity, and larvicidal activity. Green Process. Synth. 11, 931–950. https://doi.org/10.1515/gps-2022-0080 (2022).
We appreciate the faculty of science (boys) of Al-Azhar University unwavering assistance throughout this research.
Open access funding provided by The Science, Technology & Innovation Funding Authority (STDF) in cooperation with The Egyptian Knowledge Bank (EKB).
Department of Chemistry, Faculty of Science, Al-Azhar University, Nasr City, Cairo, Egypt
Ahmed G. Ibrahim, Walid E. Elgammal, Mohamed M. Elsenety, Ahmad E. Mohamed & Saber M. Hassan
Department of Botany and Microbiology, Faculty of Science, Al-Azhar University, Nasr City, Cairo, Egypt
Amr Fouda & Ahmed M. Eid
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
A.G.I., A.F., W.E.E.; Conceptualization, Methodology, Validation, Formal analysis, Data Curation, Writing—Original Draft, and Writing—Review & Editing. A.M.E., M.M.E., A.E.M.; Methodology, Validation, Formal analysis, Software, Data Curation, and Writing—Original Draft. S.M.H.; Conceptualization, Validation, Resources, and Supervision. All authors are approving the final version of the manuscript to be published.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Ibrahim, A.G., Fouda, A., Elgammal, W.E. et al. New thiadiazole modified chitosan derivative to control the growth of human pathogenic microbes and cancer cell lines. Sci Rep 12, 21423 (2022). https://doi.org/10.1038/s41598-022-25772-4
DOI: https://doi.org/10.1038/s41598-022-25772-4
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
BMC Complementary Medicine and Therapies (2023)
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
4-Oh-3-No2-Benzaldehyde Sign up for the Nature Briefing: Cancer newsletter — what matters in cancer research, free to your inbox weekly.